Preparing Drinks; Selecting A Suitable Cup - Silvercrest SEMM 1470 A2 Bedienungsanleitung

Preparing drinks

CAUTION! PROPERTY DAMAGE!
■ Insufficient descaling can damage or destroy the appliance! Descale the
appliance regularly. Please refer to the section "Descaling mode".

Selecting a suitable cup

The preset quantity shown in the table indicates the total volume, consisting of
coffee – and if applicable, milk and milk foam – that is dispensed when the
respective programme is selected. Depending on the desired beverage, select
a suitable cup for the preset quantity.
If you would like a greater quantity of coffee, milk or milk foam, select a
correspondingly larger cup.
Drink
Espresso
Cappuccino
Latte
macchiato
Note: The various drink quantities are controlled via the duration of the drink
output. In other words, for a double espresso the espresso flows for twice as
long out of the espresso outlet q as for a single espresso.
1) For small espresso or coffee cups, pull the tray for small cups 9 out of the
appliance and place the cup on it.
2) For large cups or glasses, push the tray for small cups 9 into the appliance
and place the glasses/cups on the drip grille 8.
3) If there is not enough room, remove the drip tray 7 from the appliance and
place the glass directly on the base of the appliance.
│ GB │ IE
■ 14
Size Preset quantity
Single approx. 40 ml
Double approx. 80 ml
Single approx. 250 ml
Double approx. 350 ml
Single approx. 280 ml
Double approx. 400 ml
Programmable
approx. 20 – 70 ml
approx. 40 – 150 ml
Time for preparation
of frothed milk:
5 – 40 sec
Time for preparation
of frothed milk:
5 – 70 sec
Time for preparation
of frothed milk:
5 – 70 sec
Time for preparation
of frothed milk:
5 – 90 sec
SEMM 1470 A2