Requirements For The Chimney - TermaTech TT23RG Montage- Und Bedienungsanleitung

TT23RG +TT23RGS: Distances to flammable materials using UNINSULATED fluepipes*
100mm behind the stove to flammable material
700mm beside the stove to flammable material
520mm behind/beside if mounted 45° in a corner
1100mm in front of the stove to flammable material
520
520
TT23RG +TT23RGS: Distances to flammable materials using INSULATED fluepipes*
50mm behind the stove to flammable material
700mm beside the stove to flammable material
490mm behind/beside if mounted 45° in a corner
1100mm in front of the stove to flammable material
490
490
*These distances only apply to the stove. Other distances apply to fluepipes.
The safety distances to flammable walls for TT23RGW:
The stove have to be mount on a non-combustible wall.
700mm from the sides of the stove
340mm from floor to the bottom of the stove
1100mm from the front of the stove
Distance to non-flammable materials
It is recommended that there is a minimum of 50-100 mm behind (Except TT23RGW wallhanging)
and beside the stove so the stove can dispose of the heat, this distance makes cleaning of and
around the stove easier. In addition, refer to the relevant Building Regulations.

Requirements for the chimney

The chimney must be of sufficient height so the draught conditions are okay the smoke does
not bother anyone. Good draught in the chimney is crucial to the stove working as intended and
TT23RG / TT23 RGS
TT23RG / TT23RGS
700
700
960
960
TT23RG / TT23 RGS
TT23RG / TT23RGS
700
700
960
960
25