TermaTech TT23RG Montage- Und Bedienungsanleitung Seite 32

Drawings with explanations
Replacement of insulation plates
3. Art.:No. 400-584
4. Art.:No. 400-585
6. Art.:No. 400-588
8. Art.:No. 400-533
Adjusting the doors auto lock
Changing the pull in the door
32
Remove the split
and tighten the screw
(clockwise) depending
on how fast the door
should close.
To change the pull in the door,
adjust the two magnet modu-
les.
10. Art.:No. 400-575
11. Art.:No. 400-574
2. Art.:No. 400-586
1. Art.:No. 400-573
7. Art.:No. 400-588
5. Art.:No. 400-587
9. Art.:No. 400-532
Scale: Tegningsnr. / emnenavn:
Material:
Assembly
1:5
Gunnar Clausens Vej 36
DK-8260 Viby J. Adjusting the feet
PROPRIETARY AND CONFIDENTIAL. The information contained in this drawing is the sole property of TermaTech AS.
Any reproduction in part or as a whole without the written permission of TermaTech AS i prohibited.
Adjusting the top plate
Revision
07-10-2021
40120 Verm. assy TT23G
Title: Created date
27-01-2020
Samlet verm. til TT23G
Initialer:
Model:
EMN
TT23G
Denne tegning er vor ejendom, den må ikke kopieres på nogen måde
og ikke gøres tilgængelig for trediemand uden vor skriftelige tilladelse
Follow the numerical
order when inserting
the vermiculite -
reverse order when
removing
Rev.
C
Generel tolerance:
DS/EN22768-m
The 4 adjustable
feet have to be adju-
sted outside with a
25mm wrench key, or
from inside with a
5mm unbraco
key.
Adjusting the top
plate is done by the
5 nuts located under
the top plate.