•
Normalposition ist mit Zeigerstellung (1)
auf Mittelbezeichnung mit Aufkleber (2)
markiert.
•
Falls die Schlepperhydraulik schwach
ist, das Ventil neben
der Kreiselheuerhydraulik zumachen.
3.4 Einstellung des Auswurfwinkels
A
In verschiedenen Bediengungen der Wenden
und
Rechen
sind
empfohlen:
Grundstellung 18° Bild 17 A
Üblich einstellbare Möglichkeit
Größerwinkelstellung 20° Bild 17 B
Große Masse des langen Grünlandes
Kleinerwinkelstellung 16° Bild 17 C
Kleine Masse des kurzen Grünlandes
73
All manuals and user guides at all-guides.com
Schnellkupplung
Bild - Figure 17
B
folgende
Einstellungen
•
Normal position is marked with the
position of the pointer (1) on the
middle mark with label (2).
•
If the tractor hydraulics is weak, close
the valve near the fast clamp of the
rotary tedder hydraulics.
3.4 Setting the eject angle
C
In different conditions of turning and collecting
the
following
eject
recommanded:
Basic position 18° figure 17 A
Usually adjustable possibility
Bigger angle position 20° figure 17 B
Big mass of long gras ground
Smaller angle position 16° figure 17 C
Small mass of short grass ground
angle
setting
is