Wireless Setting; Dcm (Digital Channel Matching); Viper Ttl Group Mode Setting; Group Power Control Setting For Manual And Ttl Fec - Hahnel MODUS 600RT MKII Bedienungsanleitung

5
Wireless Settings

DCM (Digital Channel Matching)

1. DCM (Digital Channel Matching). Carry out the DCM matching,
see page 23
2. Set the Modus 600RT to 2.4GHz as Slave Unit - Group A, see
page 23
3. Press Viper <test>
triggered wirelessly

Viper TTL group Mode Setting

Press buttons
group to <TTL>, <M> manual & <blank> OFF.
Take a test photograph now and the Viper transmitter will send a
wireless signal to each Modus 600RT and to each 3rd Party Speedlight
connected to a Viper TTL receiver. The Speedlight will then be set
automatically to the same Viper TTL selected group mode setting.
• The Viper LCD
• A group is turned OFF if the LCD is not showing the group
• A group is in Manual mode when <M> is displayed next to the group
• A group is in TTL mode when <TTL> is displayed next to the group
• Each group
use simultaneously different setting for each group (e.g. Group
be in <M>, Group

Group Power Control setting for Manual and TTL FEC

From the Viper TTL transmitter you can adjust the power level and the
FEC of each group.
4. Press <SEL>
<C> will flash.
5. Press one button
to adjust the power. Now only the selected group icon <A or B or
C> will flash
6. Use the adjust dial to set the power output in <
FEC in TTL mode
7. Press the <SEL> button to lock your selection

Multi Mode

Press and hold the < Group A > button to select the Multi mode <
•
> icon. Use the <SEL> button, Group Buttons and adjust dial
MT
to set the number of flashes, flash frenquency and power output.
Press the <SEL> button again to lock selection
• For more detail on operation of the viper TTL visit www.hahnel.ie

Sync Modes

• Press and hold the < Group B > button to select the High Speed
sync <
• Press and hold the < Group B > button again to go back to normal
sync
30
button to confirm that Modus Speedlight is
08
to change the MODE setting of each
or or
A B C
05
will show the setting of each group
,
or
A B C
B
in <TTL> and Group
select button and all three icons <A>, <B> and
02
or
A B
> icon will switch on
Wireless Flash
Photography:
(2.4GHz) using
Viper TTL Transmitter
is set independently and it is possible to
C
turned OFF)
or to select which group you want
C
A
may
> mode and
M
Modus 600RT