Wireless Settings; Master Unit Setting; Slave Unit Setting; Master Unit Flash On/Off - Hahnel MODUS 600RT MKII Bedienungsanleitung

Master Unit Setting

• In the master unit mode <
Flash Wireless Mode (WL) before attaching the Speedlight to camera.
"SET YOUR CAMERA" will be displayed in the Master unit LCD, if your
camera is not set to (WL) mode. Refer to the camera manual on how to
set the camera to (WL) mode.
• If a Sony branded flash unit is communicating wireless optical with
Modus 600RT, set it to WL CTRL on the flash menu when it is a Master
- and set it to WL RMT on the flash menu when it is a Slave. Refer to
the flash unit manual for details.

Slave Unit Setting

Master Unit Flash ON/OFF

You can switch ON or OFF the "Master" unit flash that is controlling
the wireless "Slave" units. When Master flash is ON, it will flash as
group M.
• Even if the master unit flash firing is disabled, it still fires a preflash to
transmit wireless signals

Setting the optical Communication Channel

The Modus 600RT has four optical communication channels. The
master and the speedlights must be set to the same channel.
Master
• Press function button 3 <
set the required channel
• Press <SET> button to lock selection
Slave
• Press function button 4 <
set the required channel
• The channel must be set the same as the master speedlight
• Since the optical lighting system (WL) is restricted by the Sony's
wireless protocol, it is recommended to use the 2.4GHz wireless system
which is a more reliable wireless system.
• Turn off the cameras Flash Wireless mode (WL) when not using the
optical wireless system. Refer to the camera manual on how to turn off
the camera (WL) mode
Modus 600RT
Press <
that <
MASTER
the LCD panel.
CTRL+> you must set the camera to
Press <
> and <
displayed on the LCD panel.
> and use the select dial to
CH
CH
> and use the select dial to
> button so
CRTL+> and <
> are displayed on
> button so that <
> are
SLAVE
29