Multiple Master Unit; M: Wireless Flash Shooting With Manual Flash - Hahnel MODUS 600RT MKII Bedienungsanleitung

Multiple Master Unit

You can use two or more cameras with master flash units on each to
change camera shooting while keeping the same lighting setup (slave
units) in wirelesss flash photography.
• Second Curtain Sync - is only enabled when using the Viper TTL
Transmitter
M: Wireless Flash Shooting with Manual
Flash
This describes wireless using manual flash. You can shoot with a
different flash output setting for each slave unit (firing group). Set all
parameters on the master unit.
MULTI: Wireless shooting with Multi repeat-
ing flash stroboscopic
26
1. Setting the manual flash
mode to <M>
• Press Function Button 4
< >
to choose the
Gr
group
• Then press Function Button
< >
3
MODE
<M> mode
2. Setting manual flash output
power
• Press Function Button 2 <
>. Turn the Select
Dial to adjust the flash output
of the group
• Press <SET> button to
confirm
3. Setting individual group flash
output power
4. Each group M (Master
speedlight) / A / B / C can be
set individually to different
power level
• Set any group to <---> to turn
of the power of this group
1. Setting <MULTI>
stroboscopic flash
• On the Master Speedlight
press <MODE> button until
<MULTI> is displayed
• Turn the Select Dial to adjust
the flash output power. Press
<SET> button to confirm
2. Turning ON/OFF group
M (master speedlight) / A
/ B / C
• Press Function Button 3
< >. Then turn the
Gr
Select Dial to set the group
ON/OFF
to set the
Modus 600RT