M/A/B/C: Wireless Flash Shooting With Different Flash Modes For Each Goup - Hahnel MODUS 600RT MKII Bedienungsanleitung

M/A/B/C: Wireless flash shooting with
different flash modes for each goup
You can shoot with different flash modes set for each firing group
(M/A/B/C). The flash modes that can be set are TTL auto flash / manual
/ OFF. When the flash mode is in TTL exposure is controlled to result in
standard exposure for the main subject as a single group. This function
is for advanced user who are very knowledgeable and experienced in
lighting.
SLAVE
A
SLAVE
Modus 600RT
• Press Function Button 3
3. Setting the stroboscopic
• Press Function Button
• Press <
B
MASTER <M>
1. Set master Unit
• Press the
2. Set the firing group of the
• Operate and set the slave
• Press Function Button
3. Set the flash modes
• Set the flash mode of each
4. Set the flash output
• While a firing group is
< >
again to select
Gr
the next group. Press <SEL>
button to confirm
flash parameters
4 < >. This will
MENU1
display <
MENU2
enables selecting of power <
>, number flashes
>
and frequency
Times
>
Hz
> <
or
Times
adjust the relevant setting
<
MODE
button and set the flash
mode to <
MASTER
See Page 22
slave units
units one by one
>
to assign the
Gr
speedlight to group <A>, <B>
or <C>. See
firing group by the operation
of the master speedlight. See
Page 22
and flash exposure
compensation amount
selected, press Function
> which
<
<
> or <
>
to
Hz
SLAVE
C
>
> .
<
27