Master/Slave Wireless Flash Lighting - Hahnel MODUS 600RT MKII Bedienungsanleitung

If the number of flashes is displayed as "--", the maximum number of flashes will be
as shown in the following table regardless of the flash frequency.
3
Master/Slave wireless flash lighting
• When the camera's shooting mode is set to a fully automatic mode or
an Image Zone mode, the operations in this chapter are not available.
Set the camera's shooting mode to P/Tv/Av/M/B (Creative Zone Mode).
• The "Modus 600RT" attached to the Camera Hot shoe is called the
"Master" unit. A second "Modus 600RT" which is wirelessly controlled is
called the "Slave" unit
• You can also wirelessly control the Modus 600RT as a "Slave" unit
using a "Viper TTL" transmitter as a "Master" unit attached to the
camera hotshoe
Using (Master/Slave) with wireless 2.4GHz control function allows
you to easily perform shooting with advanced wireless multiple flash
lighting in the same way as TTL autoflash photography. The system is
designed so that the setting's of the "Master" attached to the camera
are automatically applied to the wireless slave speedlights. Therefore
you do not need to operate or adjust the slaves during shooting
Positioning and Operation Range (Example of wireless flash
shooting)
• Master/Slave wireless flash lighting
SLAVE
20
Wireless Flash
Photography:
(2.4GHz) Control
2.4GHz
wireless
control
with up to
100m range
MASTER
Modus 600RT