Modus 600Rt Reset; Ttl - Fully Automatic Wireless Flash Shooting - Hahnel MODUS 600RT MKII Bedienungsanleitung

Modus 600 RT - Reset
TTL Fully Automatic Wireless Flash
Shooting
Basic Automatic Wireless Flash shooting with a
Single Slave Unit
24
• To reset the Modus 600RT to
factory default settings press
function buttons 3 & 4 at
the same time and hold until
the LCD shows <
> release the buttons
• When the Modus 600RT is
reset the DCM is also reset
back to open channel and the
previous DCM is lost
1. Master Unit Setting
• Attach a Modus 600RT to
the camera and set it as the
master unit (Page 22)
• The Viper TTL Transmitter
can also be used as a master
unit to control the wireless
slave Modus 600RT (Page
30)
2. Slave Unit setting
• Set the slave Modus 600RT
to <
SLAVE
(Page 22)
3. Position of camera and
speedlight
• Position the camera with the
master unit attached and
the Modus slave within radio
range
4. Set the Group
mode to <TTL>
• Check that group <
set to <TTL>. If not press
< > button until
MODE
<TTL> is displayed
• Check that the slave unit is
set automatically to <TTL>
by the master unit
5 Check Master/Slave units
are ready
• Check master speedlight,
ready indicator is lighting and
that the slave flash ready
indicators are blinking
RESET
> setting
flash
A
> is
A
Modus 600RT