Wireless Settings; Master Unit Setting; Slave Unit Setting; Master Unit Flash On/Off - Hahnel MODUS 600RT MKII Bedienungsanleitung

Wireless Settings

You can switch between normal flash and wireless flash. For normal
flash shooting, be sure to set the wireless setting to OFF

Master Unit Setting

Slave Unit Setting

Master Unit Flash ON/OFF

You can switch ON or OFF the "Master" unit flash that is controlling the
wireless "Slave" units. When Master flash is ON, it will flash as group M
Setting the group mode - TTL / M / OFF
From the "Master" Modus Speedlight each Group M (master
speedlight) / A / B / C "mode" setting can be adjusted individually.
22
Press < > button so that
< > and <
MASTER
displayed on the LCD panel.
Press < > button so that <
> and <
SLAVE
displayed on the LCD panel
1. Press Function Button 4 <
> and one Group
Gr
M/A/B or C will be highlighted
2. Press Function Button 4 <
> again until <
Gr
> is highlighted
M
3. Press Function Button 3 <
> until <
MODE
<--->. The master speedlight
is now OFF
1. Press Function Button 4 <
>
Gr
• Keep pressing Button 4 <
> until <
Gr
highlighted
2. Press Function Button 3 <
> and select the
MODE
desired Mode TTL <TTL> /
Manual <M> / Off <--->
> are
> are
> is
M
> is
A
Modus 600RT