Multi: Wireless Flash Shooting With Multi Flash; Gr: Shooting With A Different Flash Mode For Each Group - Hahnel Modus 600RT Bedienungsanleitung

• To fire multiple slave units with the same flash output, select ALL <
ALL
Multi: Wireless Flash Shooting with Multi
Flash
Gr: Shooting with a different Flash Mode
for each group
When using an EOS digital camera released since 2012, such as the
EOS-1DX (except for EOS 1200D), you can shoot with a different flash
mode set for each firing group, with up to 5 groups (A/B/C/D/E).
The flash modes that can be set are E-TTL II autoflash / Manual flash
/ off. When the flash mode is E-TTL exposure is controlled to result in
standard exposure for the main subject as a single group. This function
is for advanced users who are very knowledgeable and experienced
in lighting.
SLAVE
SLAVE
A
SLAVE
30
> in step 2.
E
A
B
Setting <MULTI> stroboscopic
flash.
• Press <MODE> button
on the master unit so that
<MULTI> is displayed
• Setting the stroboscopic flash
parameters as detailed on
page 23
• All flash groups have the
same number of flashes and
firing frequency
• You can use the <
> and <
described earlier to set the
power level for each group in
<
MULTI
MASTER
1. Set the flash mode to <Gr>
• Press the <MODE> Button
and set the flash mode to
< Gr >
TIMES
> buttons as
Hz
> mode
SLAVE
D
SLAVE
C
Modus 600RT