Specifications And Technical Data; Tool Specifications; Fastener Specifications - Max CN55 Betriebsanleitung

OPERATING INSTRUCTIONS MANUAL

1. SPECIFICATIONS AND TECHNICAL DATA

1. NAME OF PARTS (SEE Fig.1)
1 Frame
2 Cylinder Cap
Contact Arm
3
4 Nose
2.

TOOL SPECIFICATIONS

PRODUCT NO.
HEIGHT
WIDTH
LENGTH
WEIGHT
LOADING CAPACITY
RECOMMENDED
OPERATING PRESSURE
AIR CONSUMPTION
3.

FASTENER SPECIFICATIONS

PRODUCT NO.
NAIL LENGTH
SHANK DIAMETER
SHANK TYPE
HEAD DIAMETER
COLLATION ANGLE
TOOL AIR FITTINGS:
CN55, CN70 and CN80 use a 1/4" N.P.T. male plug. The inside diameter should be .28" / 7mm or larger.
CN100 uses a 3/8" N.P.T. male plug. The inside diameter should be .39" / 9.9mm or larger.
The fitting must be capable of discharging tool air pressure when disconnected from the air supply.
RECOMMENDED OPERATING PRESSURE:
70 to 100 p.s.i. / 5 to 7 bar. Select the operating air pressure within this range for best fastener performance.
DO NOT EXCEED 120 p.s.i. / 8 bar.
ENGLISH
5 Magazine
6 Trigger
Grip
7
8 Exhaust Cover
CN55
11-1/8" (283 mm)
5-1/8" (131 mm)
10-5/8" (270 mm)
5.5 lbs. (2.5 kg)
300 to 350 Nails
0.032 ft3 at 90 p.s.i. 0.052 ft3 at 90 p.s.i.
operating pressure operating pressure
(0.92L at 6 bar operating (1.48 L at 6 bar operat-
pressure) ing pressure)
CN55
1" to 2-1/4"
(25 to 57 mm)
.083" to .092"
(2.1 to 2.3 mm)
.197" to .224"
(5.0 to 5.7 mm)
CN70
12-7/16" (315mm) 14-1/4" (362 mm)
5" (128 mm) 5-3/16" (132mm)
12-1/16" (306 mm) 12-1/8" (307 mm)
7.6 lbs. (3.5 kg)
225 to 300 Nails
70 to 100 p.s.i.
5 to 7 bar
0.061 ft3 at 90 p.s.i.
operating pressure
(1.74 L at 6 bar operat-
ing pressure)
CN70
1-3/4" to 2-3/4"
(45 to 70 mm)
.092" to .113"
(2.3 to 2.9 mm)
Smooth, Ring, Screw
.224" to .275"
(5.7 to 7.0 mm)
15 degree
1
CN80
16-3/8" (417 mm)
6-1/8" (156 mm)
13-1/4" (336 mm)
8.2 lbs. (3.7 kg) 11.6 lbs. (5.3 kg)
300 Nails
0.11 ft3 at 90 p.s.i.
operating pressure
(3.15 L at 6 bar operat-
ing pressure)
CN80
2" to 3-1/4"
(50 to 83 mm) (65 to 100 mm)
.099" to .131" .099" to .131"
(2.5 to 3.3 mm) (2.5 to 3.3 mm)
.236" to .295" .256" to .295"
(6.0 to 7.5 mm) (6.5 to 7.5 mm)
CN100
400 Nails
CN100
2-1/2" to 4"