Recalling Broadcast Stations; Changing A Band; Tv Menu; Bssm (Best Station Sequential Memory) - Pioneer AVH-P6400CD Bedienungsanleitung

TV Tuner

Recalling broadcast stations

Press 5 or ∞ to select a

Changing a band

Press to select the desired band.
BAND
Press repeatedly to switch between the
BAND
following bands:
TV 1 = TV 2

TV menu

The TV menu has the following functions:
BSSM (best stations sequential memory)
(preset channel memory) (Refer
P.CH MEMORY
to page 33.)
(country select)
COUNTRY
Press repeatedly to turn
BSSM
When finished, the display switches to the pre-
set channel list mode.
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned.
.
Preset CH
on or off.
BSSM
BSSM (Best Station Sequential
Memory)
The BSSM function automatically memorizes
strongly transmitted broadcast stations in order
from the lowest channel up.
1 Press to display the BAND you
BAND/ESC
want to use for BSSM.
2 Select from the TV MENU, and
BSSM
press .
A.MENU
BSSM adjustment indications are displayed.
3 Press 5 to turn
BSSM
begins to flash. While
BSSM
the six strongest broadcast frequencies will be
stored in order of their signal strength. When
finished, stops flashing.
BSSM
• To cancel the storage process, press ∞
Notes
• Up to 12 stations can be memorized in 1
Band.
• In regions where reception of no more than 12
station is possible, previously memorized
stations may remain in memory.
Section
on.
is flashing
BSSM
.
En
10
47