Introduction Of Advanced Tuner Operation; Storing Broadcast Frequencies - Pioneer AVH-P6400CD Bedienungsanleitung

Section
Tuner
05
Introduction of advanced tuner
operation
1
display
FUNCTION
Shows the function status.
1 Press
A.MENU
tions are displayed.
MENU is displayed.
2 Select
TUNER
TUNER MENU indications are displayed as
follows:
(best stations memory)
BSM
(regional)
REGIONAL
(local seek tuning)
LOCAL
(program type selection)
PTY
(traffic announcement standby)
TA
(alternative frequencies search)
AF
(news program interruption)
NEWS
(preset channel memory)
P.CH MEMORY
• Select in the MENU display or press
BACK
to return to the previous display.
BACK
Pressing on the head unit returns you to
WIDE
the previous display.
• To return to the frequency display, press both
and
BAND/ESC
• If MW/LW band is selected, you can only
select ,
BSM LOCAL
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the frequency display.
20
En
1
when TUNER source indica-
and press .
A.MENU
.
DISP
and
P.CH MEMORY

Storing broadcast frequencies

You can easily store up to six broadcast frequen-
cies for later recall with 5 or ∞.
1 Press 5 or ∞ to select
the TUNER MENU, and press
P.CH MEMORY adjustment indications are dis-
played.
2 Adjust frequency with 2 or 3.
If you continue pressing 2 or 3, a strong broad-
cast frequency is automatically searched for,
and search ends when it is found.
3 Select a preset channel number with 5 or
∞ and press
4 If you want to preset frequencies one after
another, use 5 or ∞ to move to the next preset
channel you want to use to store a frequency,
and perform the same operation.
When you have finished, press
return to the source display.
The number you have pressed will flash in the
PRESET NUMBER
The selected radio station frequency has been
stored in memory.
You can use 5 and ∞ to recall radio station
frequencies assigned to
.
P .CH MEMORY
A.MENU
to preset that frequency.
A.MENU
BAND/ESC
indicator and then remain lit.
(P.CH MEMORY).
P1-6
from
.
to