Multi-Cd Player; Playing A Cd; 50-Disc Multi-Cd Player - Pioneer AVH-P6400CD Bedienungsanleitung

Multi-CD Player

Playing a CD

1
4
You can use this unit to control a multi-CD player,
which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on page 34.
1
indicator
DISC NUMBER
Shows the disc currently playing.
2
TRACK NUMBER
Shows the track currently playing.
3
indicator
PLAY TIME
Shows the elapsed playing time of the cur-
rent track.
4
DISC TITLE
When playing a CD TEXT disc, the DISC
TITLE is displayed. With regular CDs that do
not usually have the titles recorded on them,
is displayed (refer to page 39).
NO TITLE
1 Press
SOURCE
player.
Press until you see
SOURCE
2 Use to adjust the sound level.
VOLUME
Rotate to increase or decrease the volume.
3 Select a disc you want to listen to with the
5 or ∞.
2 3
indicator
to select the multi-CD
displayed.
Multi-CD
• Press 5 to select 1, 2, 3..., press ∞ to select 1,
6, 5...
4 To perform fast forward or reverse, press
and hold 2 or 3 .
5 To skip back or forward to another track,
press 2 or 3 .
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• When the multi-CD player performs the
preparatory operations,
• If the multi-CD player does not operate prop-
erly, an error message such as
be displayed. Refer to the multi-CD player
owner's manual.
• If there are no discs in the multi-CD player
magazine, is displayed. Depending
NO DISC
on the multi-CD player you use with this prod-
uct, the display may be blank.

50-disc multi-CD player

Only those functions described in this manual
are supported for 50-disc multi-CD players.
is displayed.
Ready
may
ERROR-11
En
Section
08
33