Tuner; Listening To The Radio - Pioneer AVH-P6400CD Bedienungsanleitung

Tuner

Listening to the radio

1 4
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on page 20.
This product's AF (alternative frequencies
search) function can be switched on and off. AF
should be off for normal tuning operation (refer
to page 23).
1
indicator
BAND
Shows which band the radio is tuned to, MW,
LW or FM.
2
indicator
FREQUENCY
Shows to which frequency the tuner is
tuned.
3
( ) indicator
STEREO ST
Shows that the frequency selected is being
broadcast in stereo.
4
indicator
PRESET NUMBER
Shows what preset has been selected.
1 Press to select the tuner
SOURCE
Press until you see
SOURCE
2 Use to adjust the sound level.
VOLUME
Rotate to increase or decrease the volume.
3 Press to select a band
BAND/ESC
Press until the desired band is dis-
BAND/ESC
played, , ,
FM1 FM2 FM3
2
.
displayed.
Tuner
.
for FM or .
MW/LW
4 To perform manual tuning, press 2 or 3
with quick presses.
The frequencies move up or down step by step.
5 To perform seek tuning, press and hold 2
3
or 3 for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pressing either
2 or 3 with a quick press.
• If you press and hold 2 or 3 you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
Note
• When the frequency selected is being broad-
cast in stereo the
light.
ST indicator will
STEREO ( )
Section
05
19
En