Adjusting Loudness; Using Subwoofer Output; Using Non Fading Output - Pioneer AVH-P6400CD Bedienungsanleitung

Audio Adjustments

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press 5 or ∞ to select
AUDIO MENU, and press
LOUDNESS adjustment indications are dis-
played.
2 Press 5 to turn loudness on.
Loudness level (e.g.,
LOUDNESS:ON/
) appears in the display.
MODE:MID
3 Press 2 or 3 to select the level.
Press 2 or 3 until the desired level appears in
the display.
(low)— (mid)—
LOW MID
4 Press ∞ to turn loudness off.
appears in the display.
LOUDNESS:OFF

Using subwoofer output

This unit is equipped with a subwoofer output
which can be switched on or off.
1 Press 5 or ∞ to select
the AUDIO MENU, and press
SUB WOOFER adjustment indications are dis-
played. When the subwoofer controller setting
is
S.W CTRL:EXTERNAL
.
WOOFER
2 Press 3 to turn subwoofer output on.
appears in the display.
SUB WOOFER:ON
Subwoofer output is now on.
• You can turn off subwoofer output by pressing
2. If you do not set to ON, you cannot select
or
PHASE, LEVEL FREQUENCY
3 Press 5 or ∞ to select the item you want to
adjust.
from the
LOUDNESS
.
A.MENU
(high)
HIGH
from
SUB WOOFER
.
A.MENU
, you cannot select
SUB
.
4 Press 2 or 3 to adjust the item.
(phase)
PHASE
(normal)—
NORMAL REVERSE
(adjustment level)
LEVEL
• – is displayed as the adjustment level is
+6 –6
increased or decreased.
(cut-off frequency)
FREQUENCY
— (Hz)
50 125
• Only frequencies lower than those in the
selected range are output from the subwoofer.

Using non fading output

When the non fading output setting is on, the
audio signal does not pass through this unit's
low pass filter (for the subwoofer), but is output
through the RCA output.
When the non fading output is on, you can
adjust the level of non fading output.
1 Press 5 or ∞ to select
the AUDIO MENU, and press
NON FADING adjustment indications are dis-
played. When the subwoofer controller setting
is
S.W CTRL:EXTERNAL
fading output on/off mode.
2 Press 5 to turn non fading output on.
appears in the display. non
NON FADING:ON
fading output is now on.
• You can turn off non fading output by pressing
∞.
3 Press 2 or 3 to adjust the output level of
the non fading.
Each press of 2 or 3 increases or decreases
the level of the non fading (e.g.,
Press 2 or 3 until you see the desired value
displayed.
(reverse)
from
NON FADING
.
A.MENU
, you can select non
to ).
+6 –6
En
Section
12
61