Introduction Of Set Up; Selecting The Video - Pioneer AVH-P6400CD Bedienungsanleitung

Section
Other Functions
14

Introduction of set up

Customize the settings to suit your taste and
environment.
1 Press
A.MENU
MENU is displayed.
2 Press 5 or ∞ to select
.
A.MENU
SET UP MENU is displayed as follows:
VIDEO SETTING
(auto flap setting)
AUTO FLAP
CLOCK ADJUST
You can operate a desired function. For details,
refer to the pages for each of the functions.
Select in the MENU display or press
BACK
to return to the previous display.
BACK
Pressing on the head unit returns you to
WIDE
the previous display.
• To return to the playback display, press both
and
BAND/ESC

Selecting the video

Set so that only the display video can be
selected. The display for this MENU is the same
regardless of which source you operate from.
1 Press 5 or ∞ to select
the SET UP MENU, and press
VIDEO SETTING adjustment indications are
displayed.
2 Press 2/3 to select the
Press 2 or 3 until the desired video setting
appears in the display.
(off)—
OFF VIDEO
(back up camera)—
• If the equipment is connected to a RCA video
input, choose
VIDEO
ment.
68
En
in each source display.
, and press
SET UP
(video setting)
(clock adjust)
on the remote control.
WIDE
VIDEO SETTING
A.MENU
.
VIDEO
(video)—
BACK UP CAMERA
(Multi-DVD)
M-DVD
to view video of the equip-
• When using a DVD player unit connected with
an RCA cable, if you do not select
will be no picture even if you switch sources.
• When using a DVD player unit connected with
an AV-BUS cable, do not select
do, there will be no picture.
• If you select
move to
BACK UP POLARITY
select
BATTERY
BATTERY
REVERSE (R) position, and the polarity of the
connected lead wire is positive.
: When the gear shift is moved to the
GND
REVERSE (R) position, and the polarity of the
connected lead wire (refer to page 30) is nega-
tive.
• This product features a function that automat-
ically switches to the video input into the video
or back camera jack when a back-up camera is
installed on your car. If this is the case, when
the gear shift is in the REVERSE (R) position,
the video automatically switches to video or
back camera. (The default setting is
For more details, consult with your dealer.)
Notes
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the playback display.
• If you select
from
the correct video setting may not occur.
. Confirm that directly after changing the set-
ting, it changes to VIDEO when the gear shift
is moved to REVERSE from another position.
• If you select
play changes to VIDEO during normal dri-
vings, reverse the settings.
M-DVD
BACK UP CAMERA
, or use 2 or 3 to
and .
GND
: When the gear shift is moved to the
BACK UP CAMERA
BACK UP CAMERA
, there
M-DVD
. If you
, press ∞ to
.
BATTERY
, switching to
and the dis-