Beper P102SBA500 Betriebsanleitung Seite 10

Automatic Pasta Machine Use instructions
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
Product description Fig.A
1. Main unit
2. Mixing bow
3. Mixing axle
4. Extruding pipe
5. Extruding axle
6. Closing ring
7. Lid
8. Extruding head ring
9. Extruding head
10. Water cup
Safety warnings
Before use, check that the mixer, the pipe, the screw and other removable parts are not damaged.
The minimum quantity of workable flour is about 160 g or 1 measuring cup while the maximum quantity is about 320
g (two measuring cups). Different flours with different strengths and in more or less humid environments can give
different results.
Add water and flour respecting the proportion between the ingredients indicated in the reference table. Otherwise, the
pasta will be too dry or too moist and the accessories could be damaged.
The product has a safety device so that if the lid is lifted during operation, the machine switches off.
While in operation, the machine detects whether the dough is soft or hard and reverses the rotation. Check if the
dough is too dry or if there are foreign bodies in the bowl. If everything is regular, add the right amount of water.
The machine stops automatically after a cycle of use. If you want to continue using the product let it rest for 10 mi-
nutes.
When the plug is connected to the power outlet, if a light flashes, disconnect the plug from the power outlet and check
if flour or other objects are stuck. Remove them, then reconnect the plug to the power outlet to continue using the
machine.
When the product is running, do not add any solid food (eggs must be mixed with water).
No part of this product can be sterilized inside a microwave oven, in order to avoid damage and deformation caused
by heat.
Before using the product for the first time, wash the parts in contact with food.
Product assembly Fig.B
Make sure the cable is not connected to the power outlet.
Insert the mixing axle into the bowl and connect it to the main unit. Insert the extrusion pipe into the container.
Insert the extrusion axis and insert the selected disc into the extrusion head until you hear a click. Insert the extrusion
head on the pipe, the disc must be facing downwards. Screw the locking ring and close the bowl with the lid.
11. Flour cup
12. Cleaning scaple
13. Noodle disc
14. Square spaghetti disc
15. Maccheroni disc
16. Linguine disc
17. Tagliatelle disc
18. Spaghetti disc
19. Neapolitan fusilli disc
20. Big size spaghetti disc
10