Sterilization Instruction; Cleaning And Disinfection Instruction - Stryker F-SFFFBER Gebrauchsanleitung

INSTRUCTIONS FOR USE

Sterilization Instruction:

This device is not intended to be sterilize. Equipment damage may occur.

Cleaning and Disinfection Instruction:

The resistance on the Tilt Pin is set at the factory, however it can be adjusted by
the user if desired.
To adjust the resistance:
1. Pull down on the handle
and rotate away from leg.
2. Turn handle clockwise to
increase the resistance,
OR
Turn handle counter-
clockwise to decrease the
resistance.
3. After adjusting, pull down
on handle and rotate until
handle touches leg.
Document Number: 80028282
Version: B
Page 31
Issue Date: 15 APR 2020
Ref Blank Template: 80025118 Ver. E