Overview Of Spare Part Sets; Designated Use - Endress+Hauser Prosonic Flow E 100 Einbauanleitung

EA01219D
1

Overview of spare part sets

The Installation Instructions apply to the following spare part sets:
Order number
XPD0041–
XPD0042–
• The order number of the spare part set (on the product label on the package) can differ
from the production number (on the label directly on the spare part)!
• You can find the order number of the relevant spare part set by entering the
production number of the spare part in the spare part search tool.
• We recommend that you keep the Installation Instructions and packaging together at
all times.
2

Designated use

The spare part sets and Installation Instructions are used to replace a faulty unit with a
functioning unit of the same type. Only original parts from Endress+Hauser may be used. Only
spare parts kits designed by Endress+Hauser for the measuring device can be used at any
time.
Inspection is performed using the W@M Device Viewer. The procedure involved is described
as follows.
A spare parts overview is located in the interior of some measuring devices. If the spare
parts kit is specified on this list, no inspection is required.
1.
www.endress.com/deviceviewer
2.
Ser. No.: 12345
4
Original spare part set
Electronics module set Prosonic Flow E 100
Electronics module set Prosonic Flow E Heat
Order code Description
3.
=
?
4.
1. www.endress.com/deviceviewer
2. Enter serial number (ser. no.), search for product
data and click Spare Parts.
3. All spare parts for the measuring device are
displayed.
4. Determine the order number of the spare parts kit.

The spare parts kit may be used only if the order
number of the spare parts kit corresponds to an
order number on the spare parts list.
Endress+Hauser