Overview Of Accessories; Designated Use - Endress+Hauser Promag 800 Index C Installationsanleitung

EA01338D
1

Overview of accessories

The Installation Instructions apply to the following accessories:
Order number
DK5CA-
2

Designated use

The spare part sets and Installation Instructions are used to replace a faulty unit with a
functioning unit of the same type. Only original parts from Endress+Hauser may be used. Only
spare parts kits designed by Endress+Hauser for the measuring device can be used at any
time.
Inspection is performed using the W@M Device Viewer. The procedure involved is described
as follows.
A spare parts overview is located in the interior of some measuring devices. If the spare
parts kit is specified on this list, no inspection is required.
1. www.endress.com/deviceviewer
2.
Ser. No.: 12345
4
Original accessory
Cable set, remote Promag 800
Order code Description
3.
=
4.
Contents
1 × cable, remote Promag 800
1. www.endress.com/deviceviewer
2. Enter serial number (ser. no.), search for product
data and click Spare Parts.
3. All spare parts for the measuring device are
displayed.
4. Determine the order number of the spare parts kit.
?

The spare parts kit may be used only if the order
number of the spare parts kit corresponds to an
order number on the spare parts list.
Endress+Hauser