Parts Description; Measurement In Dry Environments - Vaisala DRYCAP DM70 Kurzanleitung

1.1 Parts description
6
5
Figure 1 DM70 parts
1 Charger socket
2 MI70 indicator
3 Connector ports for probes and cables
4 Calibration button
5 Sampling cell DSC74 (optional)
6 DMP74 probe
1.2 Measurement in dry environments
The following recommendations should be taken into account when measuring in very dry
environments:
• A clean environment is always best for humidity measurements.
• The number of connections should be minimized to avoid leaks.
• The flow rate must be adequate.
• Dead ends must be avoided as they cannot be flushed easily.
1
4
Chapter – Introduction to DM70
2
3
7