Vaisala DRYCAP DM70 Kurzanleitung Seite 18

1. Switch off the MI70 indicator.
2. Connect the 2 probes to the connector ports (port I and II) on the bottom of the indicator.
3. Switch on MI70.
4. Check that the environment settings of the probes in port I and II are the same if you are
taking measurements from the same condition. In this case, select
prompts you to check the environment settings.
5. The reading of the probe in port I is now displayed on the upper row(s) and the reading of
the probe in port II on the lower row(s) of the MI70 display.
Figure 4 Display example with carbon dioxide and temperature and humidity probes
connected simultaneously
18
M212551EN-B
Yes when MI70