Cf-Unit; Chain Tension - FAS Euroline Bedienungsanleitung

CF-unit

Chain tension

Inside sealing section
• The tension in the chains is correct when the
sealing bar can be moved 10 mm outwards
from its support.
• Tighten the chain by loosening the screws in
the lower bearing housing. Push the bearing
housing downwards with a pinch bar, see
Fig. 5. Tighten the screws for the bearing
housing.
Note Sealing bars should be engaged when
chain tension is checked.
Inside cooling section
• The tension in the chains is correct when the
cooling bar can be moved 20 mm outwards
from its support.
• Tighten the chain by loosening the screws in
the lower bearing housing. Push the bearing
housing downwards with a pinch bar, see
Fig. 6. Tighten the screws for the bearing
housing.
June 2014
CF-unit
Fig. 5
Fig. 6
BW / U 900 30