Preheat Settings For Off-Line Production - FAS Euroline Bedienungsanleitung

Preheat settings for Off-line
production
The preheat function will reduce scrap after a
master roll change or after a short production
stop.
Press F1.
Step down to "offline" and choose "on"
Press F4 for Pre heat settings.
Step down to "Preheat settings" and enter the
preheat settings menu.
June 2014
Settings and adjustment
BW / U 900
Bags 12 Cnt 06
Sealset Seal1 4.0A
42% Seal2 4.0A
Speed 50 m/min
Fig. 1 The main menu
Perf Pos 875
Tearoff Speed 3
Tearoff 10 laps
Open-grippers 2 laps
Offline on
Dancer/servo
Direction CCW
Fig. 2 Menu F1, Settings SP menu
Hotmelt
Tape
Core
Twist Tie
CNT From Knife #---
Preheat settings #
Fig. 3 Menu F4
set#
#
#
#---
#
28