Inhaltsverzeichnis
Werbung
Tuning in programme channels
Displaying the Tuning menu
All tuning options are selected from the Tuning menu.
1
Press the MENU button (under the lid).
_________________________________________________________________________
2
Select the option "Tuning" by pressing the cursor buttons (up or down).
_________________________________________________________________________
3
Confirm the selection by pressing the OK button.
_________________________________________________________________________
4
Select the required alternative with the cursor buttons, then follow
instructions on the screen.
Automatic retuning
Select this option to delete previously tuned programme channels and
replace them with new ones. The TV set will sort programmes into the
factory preset order.
Add new programs
Select this option when you want to search for and store programme
channels that have not been tuned in previously.
Clear all programs
Select this option when you want to retune the TV set completely. The
TV set will repeat the steps described in the section "First time
installation".
_________________________________________________________________________
Manual tuning
1
Repeat steps 1-3 above and select "Manual tuning".
_________________________________________________________________________
2
In the option "Program no", select the programme number with the
cursor buttons (left or right).
_________________________________________________________________________
3
Start the channel search by pressing the red button.
_________________________________________________________________________
4
If the programme is not the one you require, press the red button again.
If the programme is not transmitted using the PAL BG standard
(resulting in a picture with no colours or no sound), alter the "System"
setting (for multistandard sets only).
The other options available are:
• Name - Direct access to the Name menu.
• Channel - Channel number.
• Frequency - Channel frequency setting (fine tuning).
• System - Sound/colour system selection (for multistandard TV-sets
only).
• Decoder - Signal selection for external decoder (optional).
_________________________________________________________________________
5
Store in memory by pressing the OK button.
_________________________________________________________________________
6
Return to TV programme reception by pressing the TV button.
3P58 83041010-GB
1
2
4
5
7
8
0
CURSOR
BUTTONS
RED
BUTTON
MENU
Tuning
Automatic retuning
Add new programs
Manual tuning
External units
Copy tuning to VCR
Copy tuning from VCR
Clear all programs
Press
Go back
Manual tuning
1
Program no.
Name
TV 1
Channel
118
Frequency
280.2
System
BG
Decoder
OFF
Store
Channel
Decoder
search
instruct.
System selection:
(For multistandard TV sets only)
B G
Western Europe, Near East,
North Africa
DK
Eastern Europe
L
France
U K
The United Kingdom, Ireland,
Hong Kong
Programme from a NTSC video recorder
can be viewed, if the video recorder is
connected to the TV set with a Scart
cable.
27
3
6
9
TV
OK
»
»
Go back
Werbung
Inhaltsverzeichnis
