Switching
the appliance on
Switch on the appliance with the On/Off
button !/11.
A warning signal sounds. "AL" flashes on
the temperature display 3.
Press the alarm button "/5.
The warning signal switches off. The
warmest temperature is displayed briefly.
The factory has recommended
the following temperatures:
Refrigerator compartment: +4 °C
■
Freezer compartment: –18 °C
■
Operating tips
When the appliance has been
■
switched on, it may take several hours
until the set temperatures have been
reached.
The fully automatic NoFrost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Fig. "
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
1. Press selection button 1 until
refrigerator compartment display 2 is
activated.
2. Keep pressing +/– buttons 8 until
the required temperature is indicated.
Perishable food should not be stored
above +4 °C.
Freezer compartment
The temperature can be set from -16 °C
to -26 °C.
1. Press selection button 1 until freezer
compartment display 3 is activated.
2. Keep pressing +/- buttons until
the required temperature is indicated.
Special functions
Fig. "
timer
You can use this function to set
a period of time of 1–99 minutes. A
signal reminds you, e.g. when food is to
be taken out of the compartment after
a certain time.
A value of 20 minutes has been preset at
the factory.
en
33