Bosch KGN Serie Gebrauchsanleitung Seite 34

en
m
Caution
Drinks bottles may crack if they are
stored for longer than 20 minutes in
the freezer compartment.
Switching on the function
1. Press "timer" button 4.
2. Using the +/- buttons, set the required
time.
Switching off the function
Press the "timer" button 4 twice within
3 seconds.
"eco"
The "eco" function switches
the appliance to energy-saving mode.
The appliance automatically sets
the following temperatures:
Refrigerator compartment: +6 °C
■
Freezer compartment: –16 °C
■
Switching on the function
1. Press "mode" button 7 until
the required special function is
encircled.
2. Acknowledge the selection with
the selection button "+" 8. When
the function is switched on, a triangle
is indicated.
Switching off the function
To switch off, reselect the special
function with the "mode" button 7
and press the selection button "–" 8. The
triangle behind the function disappears
and is therefore switched off.
34
"lock"
The "lock" function can be used
to safeguard the appliance
from unintentional use.
Switching on the function
1. Press "mode" button 7 until
the required special function is
encircled.
2. Acknowledge the selection with
the selection button "+" 8. When
the function is switched on, a triangle
is indicated.
Switching off the function
To switch off, reselect the special
function with the "mode" button 7
and press the selection button "–" 8. The
triangle behind the function disappears
and is therefore switched off.
"holiday"
If leaving the appliance for a long period
of time, you can switch the appliance
over to the energy-saving holiday mode.
The temperature of the refrigerator
compartment is automatically switched
to +14 °C.
Do not store any food in the refrigerator
compartment during this time.
Switching on the function
1. Press "mode" button 7 until
the required special function is
encircled.
2. Acknowledge the selection with
the selection button "+" 8. When
the function is switched on, a triangle
is indicated.
Switching off the function
To switch off, reselect the special
function with the "mode" button 7
and press the selection button "–" 8. The
triangle behind the function disappears
and is therefore switched off.