English (Original Instructions); Technical Data - DeWalt DWE4016 Bersetzung Der Originalanweisungen

EngLIsh
ANGLE GRINDERS
DWE4016, DWE4117
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
UK & Ireland
Type
Power output
Frequency
No‑load/rated speed
Wheel diameter
Grinding wheel thickness
Wheel type
Spindle diameter
Weight
Noise values and/or vibration values (triax vector sum) according to
EN60745‑2‑3:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Surface Grinding
Vibration emission value a =
h, AG
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
18
EC‑Declaration of Conformity
o
Machinery Directive
WALT one of the
e
Angle Grinders
DWE4016 DWE4117
DWE4016, DWE4117
V 230 230
AC
D
V 230/115 230
AC
Data are in compliance with:
15 15
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑3:2011
W 750 950
+A2:2013 +A11:2014 +A12:2014 +A13:2015.
Hz 50 50
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
11000 12000
min ‑1
the following address or refer to the back of the manual.
mm 115 125
The undersigned is responsible for compilation of the technical
mm 6 6
file and makes this declaration on behalf of D
27 27
M14 M14
kg 1.91 1.99
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D
dB(A) 86 101
D‑65510, Idstein, Germany
dB(A) 97 90
07.12.2020
a
dB(A) 3 3
Definitions: Safety Guidelines
m/s 2 5.1 7.5
m/s 2 1.5 1.5
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.





WALT declares that these products described under Technical
e
WALT, Richard‑Klinger‑Straße 11,
e
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WALT at
e
WALT.
e