Comprag A Serie Bedienungsanleitung Seite 27

USAGE parameters
The contents of this menu item can be displayed, but modifications are password-protected. Modi-
fications may only be carried out by trained and qualified personnel.
FAN START TEMP
0080°C
FAN STOP TEMP
0070°C
LOAD PRESSURE
6.5bar
UNLOAD PRESSURE
8.0bar
IDLE TIME
1200s
START MODE
REMOTE
LOAD MODE
AUTO
COM MODE
COMPUTER
COM ADDRESS
0001
GROUP STATE
MASTER
SWITCHING TIME
0099h
NUMBER IN GROUP
0016
COMPRAG Screw air compressor A-Series
Switch-on temperature of the fan
Set value
Switch-off temperature of the fan
Set value
If the compressor is ready, it switches at this pressure to loaded
running
Set value
At this pressure the compressor switches to idle running
Set value
Idle run time. Suction valve closed, and main motor running
Set value
Switch on by remote control or locally via the control
Set value
Loaded running/idle running automatically or manually
Set value
Communication mode: PC / MODBUS / GROUP
Set value
Communication port, network address
Set value
Options: master / follower (slave)
Set value
Group operation. Switching time
Set value
Group operation. Number of the compressor within the group
Set value
27