Comprag A Serie Bedienungsanleitung Seite 24

Operating panel
In order to control the compressor and to read and modify programmable parameters the
controller has a control panel provided with:
- LEDs indicating the status of the compressor;
- a display indicating the operating conditions, a service need or a fault;
- buttons to control the compressor and access data collected by the controller;
- buttons to manually start and stop the compressor;
- an emergency stop button.
Fig. 4.1 Controller panel
Control panel buttons
Start of compressor
Shutdown of compressor
Return to main operating menu
Set / Loading – Unloading Mode
LCD indicator
Power indicator (red): The indicator lights up when the control is switched on and
the power supply is connected.
Power indicator (green): The indicator lights up when the motor is running.
Alarm/error indicator (red). Alarm (warning): The indicator flashes and the ma-
chine continues to run. Error: The indicator is permanently lit, there is an accom-
panying acoustic signal and the machine switches off. The error message can be
acknowledged after the cause of the error has been resolved. In order to acknowl-
edge the error message, press and hold the 'back to main menu' button
24
Up or Increment Value
Down or Decrement Value
Enter
.
Version 2.1