Vacuum Shredding; Emptying The Catcher Bag; Changing The Vacuum Shredder For Use As A; Blower - Stihl SHA 56 Gebrauchsanleitung

English

11.2 Vacuum Shredding

► Point the nozzle at the ground.
► Move forward slowly in a controlled manner.

11.3 Emptying the Catcher Bag

► Switch off the vacuum shredder and remove the battery.
► Detach the catcher bag from the vacuum shredder.
► Hold the catcher bag by the carrying ring in such a way
that no debris can fall out of the opening.
► Fully unzip the catcher bag and properly dispose of the
contents.
► Full close the zip.
► Attach the catcher bag to the vacuum shredder.
12 Changing the Vacuum Shredder for
Use as a Blower

12.1 Removing the Suction Tube and Catcher Bag

► Switch off the vacuum shredder and remove the battery.
► Remove the suction tube.
► Remove the catcher bag.

12.2 Turning the Control Handle

1
2
► Hold the vacuum shredder firmly with one hand on the
control handle (1).
42
3
12 Changing the Vacuum Shredder for Use as a Blower
► Pull the retaining latch (3) up and hold it there.
► Turn the loop handle (2) 45 degrees counterclockwise.
► Release the retaining latch (3).
► Continue to turn the loop handle (2) counterclockwise until
it engages.

12.3 Attaching and Removing the Blower Tube

12.3.1 Mounting the Blower Tube
6
5
3
2
► Align the peg (3) with the slot (2).
► Push the nozzle (1) onto the blower tube (4) up to the
desired position.
► Turn the nozzle (1) until it engages
The nozzle (1) engages with an audible click.
► Align the retaining latch (5) with the slot (6).
► Push the blower tube (4) onto the blower.
The retaining latch (5) engages with an audible click.
12.3.2 Removing the Blower Tube
► Depress the retaining latch and hold it depressed.
► Remove the blower tube from the blower.

12.4 Holding and Guiding the Blower

► Hold and guide the blower with one hand on the control
handle - wrap you thumb around the control handle.
4
1
0458-828-9821-A