Installation - Taurus Alpatec TROPICANO 2400 Bedienungsanleitung

- Do not use the appliance with pets or animals.
- Do not use the appliance to dry textiles of any
kind.
- CAUTION: Do not sleep while using this
appliance, as there is risk you could be harmed.
- Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the iron
is switched off permanently.
SERVICE:
- Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
- WARNING: There is a risk of fire if the appliance
is not cleaned following
- these instructions.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.

INSTALLATION

- Ensure that the appliance is level with respect
to the floor.
- Ensure that neither the air access nor exit beco-
me either totally or partially covered by drapery,
clothing, etc., as this increases the risk of fire.
INSTRUCTIONS FOR USE BEFORE USE:
- Make sure that all the product's packaging has
been removed.
- Prepare the appliance according to the function
you wish to use.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Guide the diffuser of the appliance to direct the
flow of air in the desired
- direction.
- Turn the appliance on by operating the function
and speed selector.
- The pilot light (C) comes on.
- Select the function you want the appliance to
carry out:
- Select the desired speed.
- Turn the thermostat control to the desired tem-
perature position.
- During use the pilot light (C) will automatically
flash on and off, thus indicating that the heating
elements are operating in order to maintain the
desired temperature.
FAN FUCTION:
- Select the fan position.
- Check that the thermostat rotatory switch is set
to the maximum.
HEAT FUNCTION:
- Select the heater position.
- Select the desired heating power.
- Check that the thermostat rotatory switch is set
to the temperature required
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance, selecting position 0 on the
speed and function selector.
- Unplug the appliance to the mains.
- Clean the appliance
CARRY HANDLE/S:
- The device has a handle on the upper part so it
can be transported easily and comfortably (Fig.
1).
ANTI-CAPSIZE SAFETY DEVICE
- The appliance has an anti-capsize safety device
which disconnects the appliance if the working
position is incorrect.
-
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which pro-
tects the appliance from overheating.
- When the appliance switches itself on and off
repeatedly, for reasons other than the ther-
mostat control, check to ensure that there are
no obstacles that impede correct air entry or
expulsion.
CLEANING
- Disconnect the appliance from the mains and let
it cool before undertaking any cleaning task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Do not submerge the appliance in water or any
other liquid, or place it under a running tap.
- NB: When the appliance is used as a heater af-
ter long periods in storage or after having been