Installation - Taurus Alpatec RCMB25 Bedienungsanleitung

- Do not use the appliance to dry textiles of any
kind.
SERVICE:
- Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
- CAUTION: There is a risk of fire if the appli-
ance's cleaning is not done according to these
instructions.
- Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer's liability null and void.
DESCRIPTION
A Louvers
B Power cord
C LED screen
D Screws
E Expansion pipe
F Remote control
G On/off switch
CONTROL PANEL
a Function button
b Time button
c + button
d - button
REMOTE CONTROL
I On/off button
II Time button
III Settings button
IV Air intensity button
V - button
VI OK button
VII + button
VIII Windows sensor button
IX Days setting button
X Program button
XI Time ON button
XII Edit button
XIII Time OFF button
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.

INSTALLATION

- Install the appliance away from flammable ma-
terial such as textiles, cardboard or paper, etc.
- Ensure that neither the air access nor exit
become either totally or partially covered by
drapery, clothing, etc., as this increases the risk
of fire.
- Appliance must be installed at least 1,8 m
above the floor.
- In the event that the appliance is mounted on a
bathroom wall, position it in such a way that the
socket, power supply cable, switches or other
controls are not within the reach a person in the
bath, shower or at the wash-hand basin.
- Do not cover or obstruct any of the openings of
the appliance.
- The plug must be easily accessible so it can be
disconnected in an emergency.
- To achieve the highest efficiency from the ap-
pliance and so as to be able to install the appli-
ance on a cold wall (an exterior wall) and below
a window. But never obstructing or covering a
ventilation area.
WALL ASSEMBLING
- Securing to the wall (Fig.1): Use the perforation
template in order to mark the right position of
the fixing rawplugs holes.
- Once the rawplugs was fitted on the wall, screw
at least two of the screws. Ensure the right
position of the appliance and screw.
- To avoid damaging the appliance, on recom-
mend to use only the holes specifically made by
the manufacturer.
- Ensure that the appliance is properly and safely
fixed in his working position with screws. To
avoid damaging the appliance, on recommend
to use only the holes specifically made by the
manufacturer.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
- Some parts of the appliance have been lightly
greased. Consequently, the first time the appli-
ance is used a light smoke may be detected.
After a short time, this smoke will disappear.
- To eliminate the smell given off by the appliance
when used for the first time, it is recommend-
ed to have it on at full power for 2 hours in a
well-ventilated room.
- Prepare the appliance according to the function
you wish to use: