Connector Panel
Notes
1. Connector panel is shown as it appears with the display laying face down.
2. VGA, RGBS or YPbPr signals may be applied via the VGA / RGBS connector.
3. DVI, RGBS or YPbPr signals may be applied via the DVI / RGBS connector.
4. BIOS may be loaded via the SERIAL CONTROL port or the ND-OS port.
Electrical Symbols
Equipotentiality:
This symbol appears next to the display's Potential Equalization Conductor. (ground post)
Open (Off) Switch:
This symbol appears on the open, or off, side of the display's rocker switch.
Closed (On) Switch:
This symbol appears on the closed, or on, side of the display's rocker switch.
3
2