Setup Menu - Nds surgical imaging ENDOVUE 42 Benutzerhandbuch

Setup Menu

Menu Position
Places the menu in 1 of 9 predefined screen positions. Press the fi or fl button to select any of the 9
screen positions.
Language
Selects 1 of 8 languages: English, Deutsch, Francais, Italiano, Svensk, Espanol, Nederlands and Russian.
Press the fi or fl button to select any of the 8 languages.
DPMS Enable
Display Power Management System. When DPMS is enabled (on), and no input signal is present for a
period of 20 seconds, the "D.P.M.S." message is displayed for 10 - 15 seconds, after which the display's
backlight is turned off and the LED in the lower right corner of the front panel turns yellow. When an input
signal is connected, the backlight is turned on and the front panel LED turns blue. Press the fl button to
enable DPMS, press the fl button to disable DPMS.
Auto Source Select
on = Searches through all possible input sources until an active video source is found. off = Video input is
manually selected. Press the fi or fl button to disable or enable Auto Source Select.
Menu Lock
Disables access to menu system. This prevents inadvertent changes to the display's settings. To enable
Menu Lock, press the fl button. MENU LOCKED is displayed when the fl button is pressed. To unlock,
simultaneously press and hold the MENU and SCROLL buttons until MENU UNLOCKED is displayed.
Video Mode
Press the fi or fl button to select the level of motion compensation: High, Low or PC. High should be
used when fast moving video images are being displayed, Low is used when slow moving or static images
are being displayed and PC is used when text and / or static graphic images are being displayed.
Operating Hours: Backlight hours of operation.
BIOS: Version of the display's BIOS firmware.
10