Control; Image Adjustments; Brightness; Contrast - Nds surgical imaging ENDOVUE 42 Benutzerhandbuch

Control

The display is controlled via a 6 button keypad. The keypad, located on the bottom front of the display,
allows the user to make adjustments to various display parameters using the On Screen Menus (OSM)
system.
4

Image Adjustments

Adjust Brightness
Adjust Contrast
Adjust Backlight
3
Press the Brightness / Contrast button to display the Brightness control.
Press the fi or fl button to increase or decrease brightness. Setting the
brightness too high or too low will decrease the amount of visible
grayscales.
Press the Brightness / Contrast button twice to display the Contrast control.
Press the fi or fl button to adjust the contrast. Setting the contrast too
high or too low causes loss of some grayscales. Color saturation may
appear incorrect.
Press the Brightness / Contrast button three times to display the Backlight
control. Press the fi or fl button to set the backlighting.
Note: Lowering the backlight level will increase the backlight lifetime.