Respironics ComfortClassic Anleitung Seite 4

STERRAD SYSTEM 100
RESPIRONICS MASK
Profile Lite™
Simplicity™
ComfortClassic™
ComfortSelect™
Total™
English
EXPOSURE TIME
Machine controlled
Machine controlled
Machine controlled
Machine controlled
Machine controlled
RESULT NO. CYCLES TESTED
Sterilization
Sterilization
Sterilization
Sterilization
Sterilization
www.respironics.com
©2002 Respironics, Inc.
ComfortClassic, ComfortSelect, Profile, Simplicity and Total are trademarks of Respironics, Inc.
CIDEX and STERRAD System are registered trademarks of Advanced Sterilization Products.
Klenzyme and Manu Klenz are trademarks of Steris Corporation.
FOR ALL MASKS:
• Inspect the mask after
processing. If any components
are damaged, replace the mask.
• Slight discoloration of the mask
cushion after processing is normal.
30 • If the swivel does not move
freely after disinfection,
replace the split washer
(part #1002720 – pkg. of 5).
30
30 • If the swivel does not move
freely after disinfection,
replace the split washer
(part #1002720 – pkg. of 5).
30 • If the swivel does not move
freely after disinfection,
replace the sealing ring
(part #452027 – pkg. of 5).
10 • If the swivel does not move
freely after disinfection,
replace the sealing ring
(part #452027 – pkg. of 5).
• Verify function of the flapper
valve after processing. If the
flapper does not move freely,
replace the mask.
Customer Service: 1-800-345-6443 • 724-387-4000
Respironics Europe: +33-(0)1-55-60-19-80
Respironics Asia Pacific: +852-234-342-18
NOTES
1013256 LK 12/19/02
Reorder No. 1011138