Litecraft OutLED AT60.zoom Bedienungsanleitung Seite 24

Dimmer Mode
<********>
White
<Balance>
LED Frequency
<****>
Fan Speed
<****>
Back Lite
<***>
Key Lock
Information
Reset Factory
24
Dimmer Mode
<********>
******** =
<Off>
<Dimmer 1>
<Dimmer 2>
<Dimmer 3>
Balance Value
<Off>
<Red>
<***>
*** = 125-255
<Green>
<***>
*** = 125-255
<Blue>
<***>
*** = 125-255
<White>
<***>
*** = 125-255
LED Frequency
<****>
**** =
<600 Hz>
<1.200 Hz>
<2.000 Hz>
<4.000 Hz>
<25 kHz>
Fan Speed
<****>
**** =
<Auto>
<High>
BackLite
<***>
*** =
<On>
<10S>
<20S>
<30S>
Key Lock
<***>
*** =
<On>
<Off>
FixHours
<****H>
**** = Betriebsstunden
Version
V*.**
*.** = Softwareversion
Reset Factory
<***>
*** =
<NO>
<YES>
setting dimmer curve
Off = dimmer linear
Dimmer 1 = dimmer s-curve 1 (fast)
Dimmer 2 = dimmer s-curve 2 (medium)
Dimmer 3 = dimmer s-curve 3 (slow)
(default setting = off)
setting white balance
(default setting = R = 255, G = 255, B = 255, W = 255)
setting PWM-frequency
(default setting = 1.200 Hz)
setting fan control
Auto = automatic temperature control
High = max. power
(default setting = Auto)
setting automatic switch off for lcd backlite
(permanent on, switch off after 10, 20, 30 seconds)
(default setting = On)
setting automatic lock of display
(default setting = On)
(Password: Up, Down, Up, Down, Enter)
display the fixture hours
display the software version
reset all parameter to factory defaults