Riester metpak Gebrauchsanweisung Seite 15

6. Spare parts and accessories
Art.no. 11235
Art.no. 11236
Art.no. 11235-536
Art.no. 11235-537
Art.no. 11237
Art.no. 11238
Art.no. 11237-536
Art.no. 11237-537
Art.no. 11239
Art.no. 11240
Art.no. 11239-536
Art.no. 11239-537
Art.no. 11241
Art.no. 11242
Art.no. 10363
7. Maintenance / accuracy check / calibration
The metpak and its accessories require no special maintenance. To check ac-
curacy please remove the tube from the manometer and hold the manometer
in vertical position. If the pointer stops on the zero indicator of the scale, the
device is accurate / in calibration. If the pointer is outside of the zero position,
you should return the device to Riester or to an authorized RIESTER dealer in
your area. We are happy to provide contact information of authorized Riester
dealers upon request.
8. Disposal
Caution!
The used medical device must be disposed of in accordance with the medical
practices in place, or local regulations for disposal of infectious
biological medical waste.
Batteries and electrical/electronic equipment must bedisposed of in accor-
dance with local regulations, not together with domestic waste.
If you have any questions about the disposal of products, please contact the
manufacturer or a manufacturer representative.
9. Warranty
This product was manufactured to the highest quality standards and subjected
to a thorough final inspection before leaving our factory.
We are pleased to issue a warranty of 2 years from the date of purchase on
all defects traceable to material or manufacturing defects. A warranty claim is
excluded from cases of improper handling or use.
All defective parts will be replaced or repaired free of charge within the war-
ranty period. This excludes wear parts.
A warranty claim can only be made if the product is accompanied by this war-
ranty card, which is filled out in full and stamped by the dealer.
Please note that warranty claims must be made within the warranty period.
We are of course happy to charge for checks or repairs after the expiry of the
warranty period. We also offer free, no-obligation quotes.
In case of warranty coverage or repair, we ask you to return the RIESTER pro-
duct with the completed warranty card to the following address:
Rudolf Riester GmbH
Dept. Repairs RR
Bruckstr. 31
D-72417 Jungingen
Germany
Serial number or batch number,
date, stamp and signature of the specialist dealer
Pad for 500 ml
Pad for 1000 ml
Pad for 3000 ml
Pad for 5000 ml
Cuff cover for 500 ml models
Cuff cover for 1000 ml models
Cuff cover for 3000 ml models
Cuff cover for 5000 ml models
Cuff cover with pad for 500 ml models
Cuff cover with pad for 1000 ml models
Cuff cover with pad for 3000 ml models
Cuff cover with pad for 5000 ml models
Manometer
Bulb
Air release valve
15