After Being Used; Cleaning - Silvercrest SQSL 10 A1 Bedienungsanleitung

NOTE: if the LED 6 flashes red quickly, the smart-
phone is incorrectly positioned. Or there is a me-
tallic foreign object on the Qi charging surface 5.
Remove it!
2. When the smartphone is fully charged, this
will be displayed on the smartphone. The
LED 6 is permanently lit in blue. (On Apple
devices, the LED 6 continues to pulse).

10. After being used

1. Pull out the plugs of the USB charger cable 8.
2. For transportation, pull the holder 4 out of the
slot 1 and slide it into the storage compart-
ment 3.

11. Cleaning

1. If necessary, disconnect the USB-C plug of the
USB charger cable 8 from the USB-C port 7.
2. Clean the device with a slightly moistened mi-
crofibre cloth. Solvents, spirits, thinners etc.
must not be used, as they can damage the sur-
face of the device.
34
GB