Samson EB 8097 Einbau- Und Bedienungsanleitung Seite 68

EU DECLARATION OF CONFORMITY
Declaration of Conformity of Final Machinery
in accordance with Annex Il, section 1. A. of the Directive 2006/42/EC
For the following products:
Pneumatic Control & Hygienic Angle Valve Type 3347-1/-7 consisting of the type 3347
Valve and Type 3271/Type 3277 Pneumatic Actuator or Type 3347 with Type 3379 or
3372 Pneumatic Actuator
We hereby declare that the machinery mentioned above complies with all applicable requirements
stipulated in Machinery Directive 2006/42/EC.
For product descriptions of the valve and actuator, refer to:
Type 3347 Valve: Mounting and Operating Instructions EB 8097

Types 3271 and 3277 Actuators: Mounting and Operating Instructions EB 8310-X

Type 3379 Actuator: Mounting and Operating Instructions EB 8315

Type 3372 Actuator: Mounting and Operating Instructions EB 8313

Valve accessories (e.g. positioners, limit switches, solenoid valves, lock-up valves, supply pressure
regulators, volume boosters and quick exhaust valves) are classified as machinery components in
this declaration of conformity and do not fall within the scope of the Machinery Directive as specified
in § 35 and § 46 of the Guide to Application of the Machinery Directive 2006/42/EC issued by the
European Commission. In the SAMSON Manual H 02 titled "Appropriate Machinery Components for
SAMSON Pneumatic Control Valves with a Declaration of Conformity of Final Machinery", SAMSON
defines the specifications and properties of appropriate machinery components that can be mounted
onto the above specified final machinery.
Referenced technical standards and/or specifications:
VCI, VDMA, VGB: "Leitfaden Maschinenrichtlinie (2006/42/EG) — Bedeutung für Armaturen,

Mai 2018" [German only]
VCI, VDMA, VGB: "Zusatzdokument zum „Leitfaden Maschinenrichtlinie (2006/42/EG) — Be-

deutung für Armaturen vom Mai 2018" [German only], based on DIN EN ISO 12100:201 1-03
Comment:
Information on residual risks of the machinery can be found in the mounting and operating instruc-
tions of the valve and actuator as well as in the referenced documents listed in the mounting and
operating instructions.
Persons authorized to compile the technical file:
SAMSON REGULATION SAS – 1 rue Jean Corona – FR-69120 VAULX-EN-VELIN
Vaulx-en-Velin, 30 July 2020
Michael Lachenal-Chevallet
R&D Manager
SAMSON REGULATION S.A.S. · 1, rue Jean Corona · 69120 Vaulx-en-Velin, France · samson@samson.fr
14-6
Joséphine Signoles-Fontaine
QSE Manager
DC032
2020-07
1
EB 8097