Before Use; Charging The Product - Parkside PALA 2000 A1 Bedienungs- Und Sicherheitshinweise

Risk of leakage of batteries / rechargeable
batteries
Avoid extreme environmental conditions and tempera-
tures, which could affect batteries / rechargeable
batteries, e.g. radiators / direct sunlight.
If batteries / rechargeable batteries have leaked,
avoid contact with skin, eyes and mucous membranes
with the chemicals! Flush immediately the affected ar-
eas with fresh water and seek medical attention!
skin. Wear suitable protective gloves at all times if
such an event occurs.
This product has a built-in rechargeable battery which
cannot be replaced by the user. The removal or repla-
cement of the rechargeable battery may only be car-
ried out by the manufacturer or his customer service
or by a similarly qualified person in order to avoid
hazards. When disposing of the product, it should be
noted that this product contains a rechargeable battery.

Before use

Charging the product

Note: Remove all packaging materials from the product.
Note: You can recharge the product by using the USB
cable provided with the specified input voltage and
10
current (see "Technical data").
Note: In order to use the product without a USB cable
you need to recharge the rechargeable battery before use.
Insert the USB (type C) connector of the USB cable
into the USB input socket (type C)
Then insert the USB plug of the USB cable
USB port on USB power supply.
Note: Pay attention to the distance between the
lamp and USB power supply because USB cable
length is approx. 1 m.
Note: During charging, the charging indicator
up red (Fig. B). When charging is complete, the charging
indicator lights up green. When the charging indicator
8
is green, pull out the USB cable
WEAR PROTECTIVE GLOVES! Leaked
or damaged batteries / rechargeable bat-
teries can cause burns on contact with the
of the product.
7
from the USB input
10
,
10
10
into the
10
10
lights
8
8
GB 9