Introduction; Intended Use; Depicted Components; Package Contents - Parkside PBSD 900 A1 Originalbetriebsanleitung

BELT SANDER PBSD 900 A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please famil-
iarise yourself with all operating and safety instruc-
tions. Use the product only as described and for the
range of applications specified. Please also pass
these operating instructions on to any future owner.

Intended use

The belt grinder is designed for the dry surface
sanding of wood, plastic, metal and plaster and
painted surfaces (depending on the type of sand-
paper used). The appliance may only be used for
dry sanding. Please note that you need to use
appropriate abrasive belts with different grains for
working different materials, and that you may need
to adapt the speed to suit the material. The appli-
ance is not intended for commercial use. Any other
use of or modification to the appliance is deemed
to be improper and carries the risk of serious
personal injury. The manufacturer accepts no
responsibility for damage(s) attributable to misuse.

Depicted components

ON/OFF switch
Additional handle (rubberised grip)
Front cover
Clamping lever for abrasive belt
Belt speed adjusting wheel
Handle (rubberised grip)
Screw for adjusting the handle
Recesses for screw clamps
Connection for dust collector
Locking button for ON/OFF switch
Dust collector
Adjustment screw for belt tracking
│ GB │ IE
■ 14
Abrasive belt
Screw clamp
Reducer
Dust extraction adapter

Package contents

1 belt sander
1 abrasive belt for wood (grain 80)
1 dust collector
1 dust extraction adapter and reducer
(for external dust extraction)
2 screw clamps
1 set of operating instructions

Technical data

Rated voltage
Rated power consumption 900 W
Idling belt speed
Rated idling speed
Abrasive belt
Protection class
Noise emission value
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear hearing protection!
Total vibration value
Total vibration value (vector total of three direc-
tions) determined in accordance with EN 62841:
Grinding with the grinding disc:
Main handle
Additional handle
Uncertainty
230 V ∼, 50 Hz (AC)
240–400 m/min
n 450–750 rpm
0
75 x 533 mm
II /
(double insulation)
L = 89 dB (A)
pA
K = 3 dB
pA
L = 100 dB (A)
WA
K = 3 dB
WA
a = 3.0 m/s 2
h
a = 2.8 m/s 2
h
K = 1.5 m/s 2
PBSD 900 A1