P Menus For The Installer - Zehnder ComfoAir 550 Installationsanleitung

Sub-menu
P26
Note:
Only applies to systems fi t-
ted with an RF switch.
P27
Menu P9  Status of programmes (from menu P5 and P6 additional programmes)
Sub-menu Description
P90 Open fi re programme active?
P91 Bypass Open?
P94 Analogue input (0-10V) active?
P95 Frost protection or Preheater active?
P97 Enthalpy programme active?

2.7.3 P menus for the installer

Menus with a line at minimum and maximum value are Reading menus.
Menu P3  Setting ventilation programmes
Submenu Description
P30 N/A
P31 Setting the capacity (in %) of the
exhaust fan in
P32 Setting the capacity (in %) of the
exhaust fan in
P33 Setting the capacity (in %) of the
exhaust fan to
P34 N/A
P35 Setting the capacity (in %) of the
supply fan in
P36 Setting the capacity (in %) of the
supply fan in
P37 Setting the capacity (in %) of the
supply fan in
P38 Current capacity (in %) of the
exhaust fan.
P39 Current capacity (in %) of the
supply fan.
Description
Overrun timer for ventilation setting 3 " using
".
• After pressing "
sec.), the ComfoAir will switch to the
setting for 'x' minutes and then automati-
cally returns to the
If any 3-position switch is operated during
this lagging time the ComfoAir will instantly
revert to the ventilation position as set at
that time.
N/A
.
LOW POSITION
.
MEDIUM POSITION
.
HIGH POSITION
.
LOW POSITION
.
MEDIUM POSITION
.
HIGH POSITION
" (> 2
CONTINUOUSLY
HIGH
setting.
NORMAL
Ventilation programme values
Minimum Maximum
0% or 15% 97%
16% 98%
17% 99%
18% 100%
0% or 15% 97%
16% 98%
17% 99%
18% 100%
- -
- -
Time delay values
Minimum Maxi- General
mum
1 Min. 120 Min. 30 Min.
0 Min. 120 Min. 30 Min.
Status
Activated
Yes (1) / No (0)
Yes (1) / No (0)
Yes (1) / No (0)
Yes (1) / No (0)
Yes (1) / No (0)
General
Reset
nL / HL
15% / 15%
nL / HL
35% / 40%
nL / HL
50% / 70%
nL / HL
70% / 90%
nL / HL
15% / 15%
nL / HL
35% / 40%
nL / HL
50% / 70%
nL / HL
70% / 90%
Current %
Current %
Reset
11 - EN 11 - EN