Connecting Lead Wire; Preparing For Session - TensCare Sure+ Bedienungsanleitung

Caution NEVER attempt to
recharge an alkaline battery.
Risk of explosion.
Caution Do not mix old, new or
different types of batteries as
this may lead to battery leakage or low
battery indication.
Disposal: Always dispose of batteries
responsibly according
government guidelines. Do not throw
batteries onto a fire. Risk of explosion.
14.2. CONNECTING
WIRE
Insert the lead wire plug into the base of
the unit.
Connect the lead from the base of
the unit to the lead in the probe.
Push the pin ends firmly into the pigtail
ends of the probe lead.
The lead wires may be damaged by
rough handling, and should be treated
with care.
Lead wire colour coding.
The ends of the lead wire are coloured
black or red. This coding is provided for
some professional uses. For most
purposes, the orientation makes no
difference, and you can ignore this
colour coding.
14.3. PREPARING
1) Before using Sure+ you will need to
visit the toilet.
2) Lubricate
surfaces and probe tip with a water-
based lubricant, such as TensCare
Go Gel or water.
to local
stimulation contacts as it may decrease
the effectiveness of the Sure+'s muscle
stimulation.
LEAD
3) Choose a comfortable position, such
as lying down on your bed on your
side with your knees raised.
4) After the wire is securely connected,
insert the probe into your vagina, in
the same way as you would a
tampon, until only the plastic rim at
the base of the probe is visible.
5) The
electrical pulse and should be in
contact with the main part of the
muscle at all times. The tissues close
to the entrance are more sensitive,
so you should avoid stimulating
them.
23
SESSION
the metal
Caution: Do not use a silicone
based lubricant
Warning: Ensure the Sure+ is
switched OFF before inserting
the probe.
metal parts conduct
FOR
electrode
on the
the