How To Use; Connecting Bluetooth - TensCare Oko Bedienungsanleitung

05. How to Use

Before first use, ensure the battery is fully charged by connecting the
eye massager to a power source using the Type-C USB charging cable
provided.
1. Place the eye massager unit on your head, such that the headset
covers your eyes.
If necessary, adjust the elastic headband to ensure a secure but
comfortable fit.
Warning: Remove contact lenses before use.
2. Turn the device on by pressing the control button on the top right
of the unit. This will immediately begin massage mode 1.
3. Press the control button to switch between the different massage
modes. There are 5 different modes. Select the mode you find
most soothing.
1 Slow mode
2 Vitality mode
3 Eye care mode
4 Pressure reduction mode
5 Sleep mode
4. We recommend using the eye massager for 15 minutes.
5. Turn off by holding the control button on the top of the unit.

06. Connecting Bluetooth

Oko Bluetooth is active at all times. To connect a device, search for
available Bluetooth devices on the device you are trying to connect to
the eye massager. The Eye Massager should appear as 'OKO'.
3
Air pressure and heat
Air pressure, vibration and heat
Air pressure and vibration
Air pressure
Heat