Display Of Programme Running Time; Starting The Programme - Miele PFD 104 SCVi XXL Kurzgebrauchsanweisung

en - Operation
Display of programme running
time
The estimated duration of the pro-
gramme selected appears in the display
before the programme begins. During
the programme sequence, the time left
until the end of the programme is dis-
played while the door is open.
Symbols appear to indicate which stage
the programme is at:

Pre-wash/Soak

Main wash

Interim rinse

Final rinse

Drying
 Finished
The displayed duration may vary for the
same programme. It is influenced by,
for example, the temperature of the in-
coming water, the reactivation cycle of
the water softener, the detergent type,
the amount of crockery and how soiled
it is.
When a programme is selected for the
first time, the display will show the aver-
age running time for a cold water con-
nection.
For each programme sequence, the
control module calculates the pro-
gramme running time according to the
temperature of the incoming water and
the amount of crockery.
46

Starting the programme

 Start the programme by closing the
door.
Confirm the previously displayed
messages with OK.
The in-operation indicator light comes
on to show that a programme sequence
has been started.
During a programme sequence, you
can use OK to display the name of the
programme that is currently running
while the door is open.

Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.